Besides, EUCHIPS is very popular with customers in addition to the optical drive, and the induction switch series products are also selling well. Recently, a new home – type intelligent microwave induction switch has been launched. Here’s a quick look at the product.
EUC030S the basis of the principle of doppler effect, the use of advanced high-tech military technology, it can effectively filter other space interference, radar signal to identify the human body, in a way that is full of intelligent control of lamps and lanterns (or other) load switch. The product has strong reliability and good anti-interference force. It can penetrate plastic, glass and thin non-metallic materials, which is high in stability and will not be affected by environmental factors. It can be used for installing smart energy saving control in aisles, halls, bathrooms, stairs, elevators, etc.
This product features the following characteristics:
(1) use 5.8G international open frequency band, filter other spatial signal interference, and work more stable.
(2) it is convenient to install 4 voltage terminal terminals.
(3) compact size, easy to install in most lamps and lanterns, do not affect the appearance of lamps.
(4) close the zero, reduce the shock current and extend the life of the product.
(5) it can be used to define the sensor region, time delay and light sensitivity threshold.
Let’s take a look at the application of EUC030S. The product(dmx master controller) is a switch sensor that matches the brand LED drivers and ballasts. When the person enters the sensing area, the light is opened and the person leaves the area. When a person leaves the sensing area, the lamp will be automatically closed after a certain time delay. Light sense can detect natural brightness, natural light is sufficient, lighting lamp is turned off state.
1. The sensor does not start during the day and the lighting fixtures are turned off.
2. The sensor automatically starts at night, and someone enters the sensor zone and automatically turns on the lighting fixture.
3. People leave the sensing area. After the lighting is kept for a period of time, the lamps will be closed automatically and the sensors will enter the waiting state.
Post time: Dec-21-2017